Try the ProQuake and let's hope that fixes it. If that doesn't work, try turning off the Windows Firewall. If neither work, post back here.
Fungus wrote:
even though I almost always lose to Toyo.
A common problem
| Rune Central http://forums.runequake.com/ |
|
| Trouble Connecting http://forums.runequake.com/viewtopic.php?f=1&t=607 |
Page 1 of 1 |
| Author: | Fungus [ Mon Apr 04, 2005 4:54 pm ] |
| Post subject: | Trouble Connecting |
Help please. I have been playing on the server Rune Quake (quake.shmack.net) for a number of years. But about two weeks ago I suddenly could no longer get into a game. Quake would tell me that I am connected but would just show the console prompt as in "]". This is very frusting. I fooled around with it, even trying to get in using the multiplay option without going through Gamespy. I suspect it might have something to do with all these Windows XP security updates that get installed automatically. Any idea? Thanks. |
|
| Author: | toyo_mr2 [ Mon Apr 04, 2005 6:44 pm ] |
| Post subject: | |
After connecting, try typing "ping" at the Quake prompt. toyo |
|
| Author: | Baker [ Mon Apr 04, 2005 10:25 pm ] |
| Post subject: | |
Your problem may or may not be Windows XP. Do you have a router or dsl/cable modem with router capabilities? If you do have a router, probably your best solution is ProQuake ( http://www.planetquake.com/proquake ) which had some router friendly programming added to it in one of the last versions. ProQuake creator wrote: Connect to 3.40 servers through routers/NAT/IP Masquerading
----------------------------------------------------------- NetQuake is notorious for its inability to connect through a wide range of routers/NAT/IP Masquerading schemes. I finally sat down and fixed this.. no more connecting through FAQproxy chains or manually editing the port numbers in ip_mask_quake.c on your linux gateway. If ProQuake doesn't solve your problem, post back and we'll run through some other possibilities (please post which Quake client you use, which ISP, and what firewall you use if the problem persists.) |
|
| Author: | Fungus [ Tue Apr 05, 2005 9:22 am ] |
| Post subject: | |
Thanks Toyo and Baker for your quick response. Here is the setup for my quake: 1. I use Winquake. 2. I use a trial(free) version of GameSpy 3. I have applied all the patches 1.0 through 1.8 (I think) from ID software 3. The only firewall I know that is running is the Windows XP firewall and there is always some update. Though I don't what the company has running. 4. ISP. I play Quake at the office and I think we have T1. 5. I also want to add that when I try to connect, I would get something like: Connection accepted 3 demo(s) in loop Hope this is the information you ask Baker. I will try proquake. Thanks again. A life without Quake is tough even though I almost always lose to Toyo. |
|
| Author: | Baker [ Tue Apr 05, 2005 10:34 am ] |
| Post subject: | |
Try the ProQuake and let's hope that fixes it. If that doesn't work, try turning off the Windows Firewall. If neither work, post back here. Fungus wrote: even though I almost always lose to Toyo.
A common problem
|
|
| Author: | Fungus [ Tue Apr 05, 2005 10:45 pm ] |
| Post subject: | |
Baker, Tried proquake and the same thing happened, i.e., I still get the ] prompt and right before that it says connected. I also turned off the firewall but that didnt' help either. Any thought? |
|
| Author: | Baker [ Tue Apr 05, 2005 11:21 pm ] |
| Post subject: | |
1. Start ProQuake and try to connect to XOC.IHOC.NET That server is a test server with a custom server built to work around the problem. Let me know if you are able to connect to that server. 2. If not, you may have 2 network connections. Something to try is find your ip address by going to http://www.whatismyip.com/ 3. After you obtain your IP address, start ProQuake as follows: c:\quake\wqpro -ip 111.222.333.444 This will force your network connection to use your internet IP 4. If #3 fails, at a minimum post your IP address here (I want to ensure it is a valid one, not a LAN IP like 192.168.1.1 or 127.0.0.1 or 10.x.x.x |
|
| Author: | Fungus [ Wed Apr 06, 2005 4:29 pm ] |
| Post subject: | |
Baker, I really appreciate your doing this for me. 1. I can connect to XOC.IHOC.NET! 2. I tried c:\quake\wqpro -ip 111.222.333.444 with my ip address but it still does not work. 3. I will send my ip address to you. Thanks. |
|
| Author: | Baker [ Thu Apr 07, 2005 1:24 am ] |
| Post subject: | |
Fungus wrote: 1. I can connect to XOC.IHOC.NET!
Good. This means that at least we have some clues to what the problem is. You are not the only person with this problem. My WinQuake.exe cannot connect at all to any server except xoc.ihoc.net . Your ProQuake may not be receiving in-bound communication from the server due to something Yugo2Heck said about ports and how Quake works. It is my understanding (I could be wrong) that the inbound Quake traffic from the server doesn't or doesn't always use port 26000 (but this is beyond my level of understanding). I am not technically literate about the inner workings of Quake or network communications. It's all greek to me. It is my understanding that Slot Zero made some changes to the ProQuake server code (like adding the lag command), perhaps he is open to considering incorporating whatever fix was coded for the xoc server. http://www.quake.ihoc.net/qsrc-pq350-ssp.patch Source thread for server side fix where Yugo2Heck recoded something: http://forums.runecentral.com/viewtopic ... 7&start=20 |
|
| Author: | Fungus [ Thu Apr 07, 2005 9:56 am ] |
| Post subject: | |
toyo_mr2 wrote: After connecting, try typing "ping" at the Quake prompt.
toyo I don't know why I didn't try this but IT WORKS! Toyo, I promise the next 3 times we meet on Rune Quake (quake.shmack.net) I won't shoot back .
Baker, I want to thank you again for all those tips. I don't think I have played anybody named Baker. I WILL BE BACK THIS AFTERNOON ON RUNE QUAKE!!!!!!!!!!!!!!!!1 |
|
| Author: | funkify [ Mon Apr 11, 2005 9:08 am ] |
| Post subject: | |
Fungus wrote: I don't think I have played anybody named Baker.
Baker: Your mother and I are very disappointed! 
|
|
| Author: | Baker [ Wed Apr 20, 2005 8:34 pm ] |
| Post subject: | |
Meatwad 1. Have you tried with ProQuake to connect to quake.ihoc.net:26000? Are you able to connect to that server? 2. If so, try to connect to Quake.Shmack.Net:26000 When it is trying to connect, type PING in the console. Does it connect? |
|
| Author: | Meatwad [ Thu Apr 21, 2005 12:46 pm ] |
| Post subject: | |
Tried that but Still Wont Work My ISP is Verizon Online DSL, using WinXp PPPoE. DSL Speeds are 706K/135K Westel DSL modem Modem SN- B90-36R515-01 Loop Lenght is 7000FT Firewall is Norton Internet Security 2002, The AntiVirus is Norton AntiVirus 2002. I also have Spybot Search and Destory My Os is Windows Xp Home with SP2, With Windows Firewall Enabled Windows XP Verison No - 2002(5.1.2600) Computer Specs Compaq Internet PC Amd Athlon Xp 1800+ Maxor 120Gb 5200RPM hard Drive Starlogic 52x CD Rom Drive Sony DRU 510A DVD+/-RW SMC 10/100 Network Card set at 800x600 nvidia 64mb geforce 2 Video Card 1gb of Pc2700 DDR-SDRam Floppy Drive 2 front USB ports/1 Front Firewire Port 4 rear USb Ports/3 rear firewire ports Crative Labs Soundblaster Live Sound card |
|
| Author: | Meatwad [ Thu Apr 21, 2005 1:21 pm ] |
| Post subject: | |
Just Figured it out, it was my Modem's Ip that i needed, not my Nic's IP I works now Thanks to all for all the help 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|